thulium-doped fiberAmplifier(referred to asTDFA),may be used to amplify-10dBm~+10dBmPowerRangeOf2μ band lasersignal,saturatedOutputPowercan reach up to40dBm,Commonly used to improve laser light sourcesTransmit power.
Characteristics | Application |
n wide wavelength range | n Optical Fiber Communication |
n high output power | n optical fiber sensing |
n low noise | n fiber laser |
optical criterion | Unit | typical values | Remarks |
wavelength range | nm | 1920~2020 | * Note1 |
Input power | dBm | -10~10 | |
saturated output power | dBm | 20/23/25/26/27/30/33/37/40 | @0DBM input |
noise figure | dB | ≤5.0 | @0DBM input |
polarization dependent gain | dB | ≤0.3 | |
polarization mode dispersion | ps | ≤0.5 | |
Input/Output isolation | dB | >35 | |
optical power monitoring | - | Output optical power monitoring | |
pigtail type | - | Single mode:SMF-28;SMF-1950; | |
Fiber pigtail joint type | - | FC/APC | |
working mode | - | automatic current control(ACC)/Automatic Power Control (APC) |
Electrical and environmental parameters | desktop | Module |
Control mode | Press the key | RS232 serial communication |
communication interface | optional | DB9 Female |
Supply Electricity | 100~240V AC,<30W | 12V DC,<60W |
Ruler inch | 260(W)×280(D)×120(H)mm | 139(W)×235(D)× 70(H)mm |
operating temperature range | -5~+35°C | |
Operating humidity range | 0~70% |
ordering information/Model | |||||
TDFA | operating wavelength | amplifier type | saturated output power(dBm) | fiber type | encapsulated form |
1920=1920~2020nm | BA=power amplifier | 20/23/25/26/27/30/33/37/40 | SM= single mode fiber | M= Module B= Desktop |
* Note 1: The standard model is designed to 1920~2020nm, and users can customize it according to their desired wavelength
thulium-doped fiberAmplifier(referred to asTDFA),may be used to amplify-10dBm~+10dBmPowerRangeOf2μ band lasersignal,saturatedOutputPowercan reach up to40dBm,Commonly used to improve laser light sourcesTransmit power.
Characteristics | Application |
n wide wavelength range | n Optical Fiber Communication |
n high output power | n optical fiber sensing |
n low noise | n fiber laser |
optical criterion | Unit | typical values | Remarks |
wavelength range | nm | 1920~2020 | * Note1 |
Input power | dBm | -10~10 | |
saturated output power | dBm | 20/23/25/26/27/30/33/37/40 | @0DBM input |
noise figure | dB | ≤5.0 | @0DBM input |
polarization dependent gain | dB | ≤0.3 | |
polarization mode dispersion | ps | ≤0.5 | |
Input/Output isolation | dB | >35 | |
optical power monitoring | - | Output optical power monitoring | |
pigtail type | - | Single mode:SMF-28;SMF-1950; | |
Fiber pigtail joint type | - | FC/APC | |
working mode | - | automatic current control(ACC)/Automatic Power Control (APC) |
Electrical and environmental parameters | desktop | Module |
Control mode | Press the key | RS232 serial communication |
communication interface | optional | DB9 Female |
Supply Electricity | 100~240V AC,<30W | 12V DC,<60W |
Ruler inch | 260(W)×280(D)×120(H)mm | 139(W)×235(D)× 70(H)mm |
operating temperature range | -5~+35°C | |
Operating humidity range | 0~70% |
ordering information/Model | |||||
TDFA | operating wavelength | amplifier type | saturated output power(dBm) | fiber type | encapsulated form |
1920=1920~2020nm | BA=power amplifier | 20/23/25/26/27/30/33/37/40 | SM= single mode fiber | M= Module B= Desktop |
* Note 1: The standard model is designed to 1920~2020nm, and users can customize it according to their desired wavelength